compression molding
英 [kəmˈprɛʃən ˈməʊldɪŋ]
美 [kəmˈprɛʃən ˈmoʊldɪŋ]
加压造型；压塑
双语例句
- They can be divided into two classes, those which are castable and those which must be processed by extrusion or compression molding.
它们可分为两类：可浇铸的和必须由挤压或模压加工的。 - Using Imported Prepreg as the Raw Material, The Second Overall Compression Molding for External Trough Line and the Tube, Excellent Surface Finishment and Mechanical Performance.
采用进口预浸布作为原材料，槽线与管体二次固化整体成型，表面光洁度和力学性能优异。 - The Optimization objective function of the biomass Compression molding process had been made.
提出了一种生物质压缩成型过程的优化目标函数。 - JE plans to develop novel rubber material study and fabricate rubber component in-house by compression molding, which improve micro-motor performance.
JE希望开展橡胶新材料的研究并建立橡胶压延生产线以生产橡胶零件，从而提高马达性能。 - If above problems can be overcome, the compression molding machines and forcing machines on the shelf in society can be recombined for reproduction.
若能联合研发解决以上难题，社会闲置的压塑机和压力机可采取多种结合方式进行生产。 - The foamed materials were prepared by compression molding, and antistatic agent was applied to polyolefine.
在聚烯烃中添加抗静电剂，采用模压法制备了发泡材料。 - Compression molding is one of the oldest techniques for processing polymers.
模压成型是最古老的聚合物加工技术之一。 - This study probes on the effect of disc birefringence with the injection compression molding process.
本研究探讨射出压缩成型条件对光碟片的双折射之影响。 - Research and Development of Biomass Compression Molding Machine Based on Finite Element Simulation and Analysis
基于有限元模拟分析的生物质压缩成型机的研发 - External trough line and the tube are through a second compression molding, and the curing process is also made the appropriate adjustments.
外部槽线与管体经由二次模压成型，固化工艺也做了相应调整。 - To date, the materials have been tested successfully in injection molding, compression molding and blown film.
迄今为止，该材料已测试成功的注塑成型，压缩成型和吹塑薄膜。 - The paper pulp compression molding product had the very long history, very early is a paper product member.
纸浆模塑制品已有很久的历史，很早就是纸制品的一个分子。 - The machine has a stirring, mixing, compression molding a set of assembly line and production efficiency.
本机具有搅拌、混合、加压成型的一整套流水生产线，生产效率高。 - Study on Selection Organic Matrix Formulation of Corn Straw Compression Molding and Breeding Technology Selection and application in cutting propagation of the new media
玉米秸发酵有机基质压缩成型及育苗技术研究玉米秸秆发酵混配栽培基质的筛选及应用研究 - Compression technology of biomass could be agriculture, forestry, solid waste compression molding, can be made into fuel instead of coal briquette.
生物质压缩技术可将固体农林废弃物压缩成型，制成可代替煤炭的压块燃料。 - Polytetrafluorethlene ( PTFE) composites with various nano-SiC ratios respectively were obtained by compression molding.
利用冷压烧结法制备了不同含量的聚四氟乙烯/纳米碳化硅（PTFE/纳米SiC）复合材料。 - New Method of Injection and Compression Molding
注射压缩成型新方法 - The influences of contacting pressure, PF content and compression molding parameters on the contact resistance were investigated.
考察了接触压力、PF树脂含量及模压工艺条件对接触电阻的影响。 - Thereby, the appropriate processing parameters for injection compression molding of optical disk have been obtained.
从而最终获得光盘基片注射压缩成型所需的合适的工艺参数值。 - In this paper, to PP-GMT, the problems in product design, blank design, tool design and compression molding processing conditions are briefly described. All these will provide a guidance in the practical product design and production of PP-GMT.
本文概括了聚丙烯基GMT材料制品结构设计、坯料设计、模具设计、温度控制、压缩模塑中需注意的问题，为PP-GMT制品的设计和生产提供一定的指导。 - The pre-impregnated hot compression molding process of the two composites were studied and mechanical properties of prepared unidirectional composites were discussed by experiment. And a micro-mechanical model was presented based on the hypothesis of periodicity in composite microstructure.
本工作研究了两种复合材料的预浸热压成型工艺，对制备的单向复合材料进行了力学性能实验研究，并基于复合材料细观结构周期性假设，建立了一种细观力学模型。 - Principles, procedures and its equipments of compression molding are reviewed.
分别叙述了模压成型、自动模压成型和液压成型的原理、过程及设备。 - Glycidyl methacrylate ( GMA) modified soy protein isolate ( SPI) plastics were prepared via the compression molding.
用模压的方法制备了甲基丙烯酸缩水甘油酯（GMA）改性大豆分离蛋白质（SPI）塑料。 - Graphite/ polymer composite plate was manufactured using compression molding with one-step which decreases the processing cost.
采用一步模压成型工艺制备复合板，降低了双极板的加工成本。 - This model takes the molding temperature and mixture ratio of straw and rice bran as the control parameters of compression molding process. It also takes molding fuel durability, relaxation density and fuel heating value as the evaluation parameters.
以稻草与米糠的混合比例和成型温度作为压缩成型过程的控制参数，以成型燃料的抗跌碎性、松弛密度和燃料热值作为压缩成型过程的评价参数。 - This paper has searched a large number of domestic and foreign literature materials. On this basis, it confirmed the main factors which affect compression molding fuel quality. The paper established LS-SVM model for the straw and rice bran mixed compression molding process.
通过查阅大量国内外相关文献资料，确定了影响压缩成型燃料品质的主要因素，建立了生物质稻草和米糠混合压缩成型过程最小二乘支持向量机模型。 - It uses compression molding and continuous sintering and other advanced technology, it can conduct large-scale production.
它采用模压成型和连续烧结等先进工艺，可进行大规模生产。 - During the injection compression molding process, there are many factors which can affect product quality performance, such as the product structure design, mold design, material performance and the combinations of process parameters.
在注射压缩成型过程中，影响制品质量性能的因素很多，如产品结构设计、模具设计、材料的结构性能以及工艺参数的设置等。 - Injection compression molding processes is a advanced type of plastic manufacturing technologies compared with injection molding process.
注射压缩成型是在普通注射成型技术的基础上发展起来的一种新型的塑料成型加工方法。 - Plasticized PET sheets were microcellular foamed by compression molding and the effects of foaming temperature, foaming pressure and plasticizer content on the cell structure and tensile mechanical properties were investigated.
随后采用模压法对增塑后的PET片材进行微发泡，研究了发泡温度、发泡压力和增塑剂含量等加工参数对微发泡增塑PET片材的泡孔结构和拉伸力学性能的影响。